Supermarine Aircraft Spitfire

*V6 Isuzu
*Quad Cam
*Water Cooled
*Wet sump Lubrication
*dual Ignition
*Fuel Injected
*Electric Start
*Dual electric Fuel pumps
*Motec ECU Pre programmed
*Mill spec Wirings
*Mill spec Plugs

Specifications

*Displacement*	*3.5L*
*Width*	*610mm*
*Length*	*630mm*
*Height*	*800mm*
*Weight*	*160KG Dry*
*Hose power*	*260 H/P 320H/P (S/C)*
*Torque*	*317FPT(S/C)*
*Bore*	*93.4mm*
*Stroke*	*85mm*
*Compression Ratio*	*9.1:1*
*Directional Rotation of prop Shaft*	*Clockwise-Pilot’s view*
*Oil*	*Castrol 0W-40*
*Oil Capacity*	*5.3L*
*Oil Pressure*	*70 psi*
*Fuel*	*100LL / 98 Oct Mogas*
*Fuel Consumption*	*28L/PH 65% throttle*

Supermarine 6 Cylinder PSRU

*To fit V6 Isuzu
*Included with engine
Package
*Cast Aluminium
*Billet aluminium
*Gears case harden

Specifications

*Weight*	*30KG Dry*
*Horse power Rated*	*350 H/P*
*Torque*	*582 FPT*
*Reduction Ratio*	*1.82to 1 (Other available)*
*Hub STD*	*SAE6 (SAE2 also available at extra cost)*
*Oil*	*H-36161*
*Oil Capacity*	*500mL*

This PSRU is a Supermarine Aircraft design for our engine packages with thousands of hours testing and flying in the field with no failures. Main housing is cast aluminium and all internal components are machined from billet aluminium with extremely Close tolerances of 0.005”

Supermarine 6 Cylinder Engine
What is included with the engine Package?

1. Brand new Isuzu 3.5L V6 crate Motor modified by Supermarine
2. Supermarine PSRU assembly and Hub(SAE6)
3. Complete wiring with all switches and circuit breakers
4. Pre-programmed Motec ECU
5. All StSt Fuel lines with fire sleeve
6. All aircraft grade Fuel lines fittings
7. All fuel pumps, regulator and filters
8. All radiator hoses in silicon long life
9. Water header tank and over flow bottle
10. Starter motor and alternator
11. Oil cooler and lines
12. StSt 12 Pod Exhausts
13. Engine mount and hardware

What do we do Different?
Supermarine Aircraft has spent the last five years developing the V6 and now the V8, both have been test flown by our CEO Mike O’Sullivan. We have done thousands of hours in the air and on dyno rigs for fine tuning and testing The Motec ECU works in Real Time this means that it is reading sensors on the engine to work out timing and air fuel ratio to give peak performance and maximum engine life. This eliminates the pilots need to lean or enrich the fuel mixture as it is always at its optimal mixture. The ECU also has pre-programmed map as a redundancy system or limp home mode. All engines are run in the factory before shipping and data logged this also means that we can carry out diagnostics on engines with a laptop computer.